Epoxy Tank Coating 1 Litre

EPOXY TANK COATING ENAMEL is two pack solvent free cold curing epoxy paint. It cures to a hard and highly resistant coating which has good resistance to fresh water, crude oil, kerosene, molasses, and to abrasion.

THIS IS A TWO PACK SYSTEM. MIX THE TWO COMPONENTS THOROUGHLY BEFORE USE. DO NOT USE THE BLEND AFTER THE POT LIFE LIMIT.

USAGE

• As a heavy duty coating where colour is not important.
• As a primer, intermediate and/or finishing coat according to specifications.
• As a tank lining for hazardous materials.
• In confined spaces.
• On concrete, timber and steel.
• In mild to highly corrosive environment.

EPOXY TANK COATING ENAMEL will yellow and chalk when exposed to direct sunlight. This chalking effect will matt down the film but will not affect the integrity of the coating. EPOXY TANK COATING ENAMEL should not be applied directly on galvanised steel or on zinc metal treated surfaces.

Note:-
Condensation or dew formation on metallic surfaces will result in poor adhesion and subsequent flaking of the paint. Avoid painting during early morning, late evening or during humid and wet periods.

PHYSICAL DATA

• Finish : Gloss
• Colour : White
• Consistency : Viscous Liquid, mixed
• Specific Gravity : 1.27, (Approx.) mixed
• Volume Solids : 100% , mixed
• Flash Point : > 23 °C, closed cup
• Hardener : EPOXY SOLVENTLESS ENAMEL HARDENER.
• Mixing Ratio : 3 parts BASE / 1 part HARDENER by volume
• Pot Life : 15-20 minutes at 25°C.